The Ranking
Our top 5 deck builders in Charlotte
Charlotte is a hard place for a deck to stay young. Summers are long, hot and humid, spring and summer storms dump heavy rain, and winter brings enough freezing nights to open cracks in old boards and loosen fasteners. Red clay soil holds water against footings, and subterranean termites are common across the Piedmont, so the condition of posts and footings matters as much as the boards you see.
Most new decks here are framed in pressure treated southern yellow pine. Homeowners then choose between treated pine or cedar boards, which cost less up front and need cleaning and sealing every few years, and composite or PVC boards from brands such as Trex and TimberTech, which cost more and mostly need washing. Several builders on this list hold manufacturer certifications, and those matter mainly for warranty claims.
Footings in Mecklenburg County must go below the local frost line set in the North Carolina Residential Code, which also has a section on wood decks that covers footing size, beam spans, ledger attachment and guards. The ledger board where a deck meets the house should be bolted, not nailed, with flashing that keeps water out of the wall. Guards are required where the deck surface is more than 30 inches above the ground and must be at least 36 inches high, with openings small enough that a 4 inch sphere cannot pass through. Ask your builder to show these details on the drawings.
Inside Charlotte city limits, residential building permits for decks, porches and screened rooms are issued by Mecklenburg County Code Enforcement, which also schedules the footing, framing and final inspections. A good builder pulls the permit in its own name. Call NC 811 at least three working days before anyone digs footing holes so buried lines are marked, and check with your HOA, since many Charlotte neighborhoods require architectural approval for materials, colors and placement before a permit is issued.
North Carolina requires a license from the North Carolina Licensing Board for General Contractors for any project costing $40,000 or more, which covers many porch and large deck jobs. Smaller jobs do not need that state license, but the contractor still needs a county permit. Before you sign, look up the license number on the board's website, ask for a certificate of insurance, and get the decking brand, footing depth and warranty in writing.