The Ranking
Our top 5 deck builders in Seattle
Seattle is hard on decks. Most of the city's rain falls between October and April, and a wood deck that stays damp from fall to spring grows moss, cups and rots at the joists and ledger long before the boards look worn out. That is why so many Seattle jobs are rebuilds, and why composite boards from Trex or TimberTech, thermally modified wood and sealed under-deck drainage show up so often in the portfolios below. Cedar is still the local default for wood decks, and hardwoods like ipe last longer but cost more.
Frost is a small factor here. The 2021 Seattle Residential Code sets the frost line at 12 inches, so footings must reach at least that deep below finished grade. Earthquakes matter more: the city sits in seismic design category D2, and the deck rules from the Seattle Department of Construction and Inspections (SDCI) require the ledger connection to the house to resist pulling away in a quake, either with the prescriptive method in Seattle Residential Code R507.9.1.3 or with an engineer's design. Decks must be designed for a 60 pound per square foot live load, and wood in contact with concrete near the ground must be treated or naturally decay resistant.
SDCI requires a permit for any deck more than 18 inches above the ground, any roof deck, and any deck in an environmentally critical area such as a landslide or flood prone slope. Most decks need only a subject-to-field-inspection permit. A full addition or alteration permit applies when the deck is more than 8 feet up, has beams 14 feet or longer, has solid flooring, or covers more than 750 square feet. Guards are required more than 30 inches above the surface below, at least 36 inches tall with openings under 4 inches, and stairs need risers no taller than 7 3/4 inches and treads at least 10 inches deep. Zoning also counts: decks taller than 36 inches add to lot coverage, and decks over 18 inches must respect front, side and rear setbacks. Condo and townhouse owners should also check HOA rules on materials and color before ordering boards.
Before any crew digs footings, Washington law requires a call to 811 at least two business days ahead so buried gas, power and water lines get marked. Every contractor who builds or repairs a deck in Washington must be registered with the Department of Labor and Industries, which also checks bond and insurance. Use the L&I Verify a Contractor lookup before signing, since three of the five companies on this list do not print a registration number on the pages we read.
Seattle's dedicated deck shops are a thin field under our rules. Several strong builders work from home addresses, coworking suites or mailboxes, or sit in Bellevue, Kirkland, Mercer Island, Burien and other cities outside Seattle. The five here passed every check.